Christmas bauble with hearts hand embroidery pattern

Intermediate · 3 colors · 2 kinds of stitch

Christmas bauble with hearts: preview of the stitched design

A round Christmas bauble hangs from a loop over its cap and is banded with hearts: round its widest part runs a row of three hearts in outline, each with a solid heart inside it, and above and below it a row of five small solid hearts, between narrow bands. The ball, the loop and the outlined hearts are stem stitch; the solid hearts, the cap, the dividing bands and the two ends of the ball are satin stitch.

Size and details

Intermediate. Long satin stitches from a 6 inch hoop up.

3 colors of floss and 2 kinds of stitch:

The stitched size and the widest satin stitch, by hoop
Hoop	Inches	Centimeters	Satin stitch up to
3 in (8 cm)	1.4 × 1.8 in	3.6 × 4.6 cm	1/8 in (3 mm)
4 in (10 cm)	2.2 × 2.7 in	5.6 × 6.9 cm	3/16 in (5 mm)
5 in (13 cm)	2.9 × 3.5 in	7.4 × 8.9 cm	5/16 in (8 mm)
6 in (15 cm)	3.6 × 4.4 in	9.1 × 11.2 cm	3/8 in (10 mm)
8 in (20 cm)	5 × 6.2 in	12.7 × 15.7 cm	1/2 in (13 mm)

In an 8 inch hoop the widest satin stitch shape is 1/2 in (13 mm) across. Satin stitches longer than about 12 mm (just under 1/2 in) tend to work loose: divide the shape into sections, or work it in long and short stitch.

The pattern is drawn inside a circle about half an inch (1.3 cm) smaller all around than the hoop.

What you need

DMC 986 Very Dark Forest GreenEnds of the ball
DMC 3852 Very Dark StrawBands, hanging loop and cap
DMC 304 Medium RedHearts, heart middles and ball

The floss is six-strand cotton; the stitch guide says how many strands to use. You also need a hoop, an embroidery needle (a size 7 to 9 suits two or three strands) and plain cotton or linen fabric. To frame the piece in its hoop, cut a square 3 inches (8 cm) wider than the hoop: a 9 inch (23 cm) square for a 6 inch hoop.

Stitch guide

Satin stitch 2 strandsEnds of the ball, bands, heart middles, solid hearts, cap
Stem stitch 2 or 3 strandsOutlined hearts, ball, hanging loop

Getting it onto your fabric

The PDF holds the pattern twice at actual size: once as drawn, and once mirrored for an iron-on transfer pen. Print it at 100% with scaling off and check the one-inch square (25.4 mm) with a ruler before you trace. How to transfer a pattern explains tracing, carbon paper and the other ways. The files are under Downloads.